Embroidery can be complicated for newbies and even frightening task. That’s we have decided to assist you as much as we can by providing you with the tips and the essential rules you will need to take into account before starting the first project. Yes, these are essential embroidery tips that will help you start the project within minutes.
Embroidery Tips for Beginners
Here are some embroidery tips for beginners. Let’s begin.
Choosing the right fabric
Keep in mind that the most essential, of all embroidery tips is to choose the right fabric. Luckily, you can’t make a massive mistake. You can embroider on any fabric you like.
However, because you are a beginner, we will recommend you to start with soft fabric, such as linen. The stitching will be perfect and even, something you need at this moment. Thick materials can be used as well, but they are more complicated to handle.
Beside linen, you can use old pieces of clothing that can be ruined, if you make a mistake. Start small, by drawing a leave on an old T-shirt and embroider that pattern. You will easily move to the next project.
Choosing the Right Embroidery Floss
The best alternative here is stranded cotton floss. It is available in many different colors so you can get the end result you are looking for.
This floss is also very forgiving and allows you to get the best possible stitch thickness. It is easy to maneuver and it is affordable. Right now, you can start with embroidery. Take an old piece of fabric, use the floss we mentioned and start.
Choosing the Right Needle
In this case scenario, you will need to base your choice on the first element we covered, the fabric. In general, thick fabric requires stronger and thicker needles.
See also: Different Types of Embroidery Needles
On the other side, the thin fabric can be embroidered with thin and ordinary needles. Just make sure that your new needle has a large threading eye, due to the fact this will make things much easier later on.
Choosing the Right Embroidery Hoop
You already know all about embroidery hoops, let’s assume. If you don’t know, we can reveal that they come in two pieces. The outer hoop which has a screw and the inner hoop that must fit perfectly inside the outer hoop. They are used together to keep the fabric in place and allow you to embroider it.
Here we can add that you can choose between plastic and wooden hoops. Both will get a job done, just make sure they are well-made so they don’t snap while using. When it comes to sizes, the matter can’t be generalized. There are so many different ones. Make sure that your hoop is big enough for your project.
Choosing the Right Scissors
All of you need to invest in high-quality scissors due to a simple reason. They will help you get a job done in less time and you will enjoy using them. Choose a model which has padded handles.
They are the most comfortable and they can be used for a long period of time. Also, choose the sharpest model out there in order to get the best cuts.
See also: 4 Best Embroidery Scissors
Scissors may look like the last thing to consider at this point, but it is an important piece of tool that all beginners need. It is a wise decision to invest a bit more in getting an excellent pair of scissors.
Transferring the Design Onto Fabric
It isn’t difficult to understand that there are countless designs out there. The big question is how you can transfer them onto the fabric. There are several methods for that. The first one is to use the iron-on method, which is obvious so don’t need to be explained.
You can also print a pattern on the piece of paper and place it over the fabric, then use the needle and floss to embroider it. You can also illuminate the design and trace it.
Starting the First Stitch
Now we must reveal how you can start the first stitch and which one you actually need to use. For most people, the backstitch is the best and the simplest option. Gather all the elements we have mentioned until now and start.
Create some basic pattern on the fabric, add hoops and start stitching. Soon you will see that all of this makes sense and you are getting the right pattern.
Using a Stabilizer
If you are an observer you won’t know anything about stabilizers. But, if you are doing the embroidery all by yourself, you will see it. This piece of toll comes in many different forms and sizes. The most common types are wash-off and cut-off. If you use it properly, you can create impressive patterns and you will get the best possible, end result.
If you use it improperly you will end up with poor design. Make sure to invest a lot of time into understanding the stabilizers and how to use one properly.
Using the Fonts
Eventually, you will need to use fonts for your projects. They can be categorized into two groups. The first type is the factory fonts which are implemented into your embroidery machine. They are easy to use and they can be fully adjusted. The second group is third-party fonts which can be obtained online and added to the machine.
Keep in mind that you can always adjust the size of a font. Almost all machines support that. Be free to experiment until you get a close idea about how this works. It is one of the embroidery tips you can only understand if you try.
What if a Needle Breaks?
Sadly a needle can break at any point and you will have to deal with it. The most common issue is this one and it affects beginners and professionals. If a needle breaks, chances are high that you are using a too thin needle for that fabric.
You need to replace it with a thicker needle. Make sure that stitching can’t be seen from the beneath or decrease the tension. If you use towels or similar piece of material, use water-soluble topping to prevent stitch sinking.
Neaten the Edge
Here is how you will do it on the simplest possible way. Use a sewing machine, overlock the edges and you are done. Yes, this sounds simple and it is.
All beginners should try or at least start with this method. Sadly, this is only possible if you have a sewing machine. If you don’t, then you must use it manually, using whipstitching.
Keeping you Embroidery Clean
Don’t forget that the embroidery cleaning is based on the type of fabric you used. Some of them can’t withstand the washing machine, so they must be hand washed only.
Others can’t withstand high temperatures which is a well-known fact. Pay attention to the label of the fabric if there is one, or look for online help for that, particular fabric and wash your embroidery project accordingly.
The last part: Finishing
You can easily finish the project by pulling the thread back to the beginning. Make it tight but not too tight or it will ruin the design. The other option is to use zigzag stitching, but it also distorts design, a little bit. The best option is to weave the thread back and end stitching.
Video: Basic Embroidery Techniques
These were the most essential and the most needed embroidery tips for all beginners who are new to the world of embroidery. Take your time with the tips and make sure you understand each one. It is much easier than it looks and soon you will start completing more and more complicated projects.